Interior Product Page
32" x 74" Doors
WSD-INT-32X74Interior door landing pages help shoppers start with the right application and then adjust the exact configuration in the builder.
1. Door Type
Choose Interior or Exterior
All doors are prehung units. For custom openings, call (928) 223-4333.
2. Size
Choose Width and Height
Doors are customized to the quarter inch measured to the prehung opening.
Quarter-inch increments from 24" to 36".
Quarter-inch increments from 60" to 82".
3. Framing
Set jamb depth and handing
Interior jamb depth range: 2" to 6".
Door handing
4. Hardware + Finish
Choose hardware and finish
Hinge finish
Handle prep
Paint color
Order Summary
$1,199
Measurement adjustment
Use the closest valid quarter-inch size.
This configurator currently accepts measurements within the supported range and snaps to quarter-inch increments only.
Added to cart
Your configured door is ready for checkout.
Continue to checkout now, or reset the builder and configure another door from the top.
Description
Why shoppers land on 32" x 74"
32" x 74" is a clean standard-size starting point for a interior prehung door order. This page exists so a shopper can start from a common size, keep the route highly relevant to the measurement they searched, and still move into quarter-inch custom sizing if the opening is close but not exact.
When 32" x 74" makes sense
At 32" wide, this is one of the most common search patterns for a single door and works well as a high-intent landing page for shoppers who already know their approximate opening. The 74" height usually catches projects that are close to common residential dimensions but still need a tighter match than off-the-shelf assumptions allow. If your opening measures right on 32" x 74", this page is the fastest path. If the job lands slightly off that number, use this page as the starting point and then switch to custom quarter-inch sizing inside the configurator instead of forcing the opening into the wrong stock dimensions.
Standard size versus custom quarter-inch
Use the standard-size path when your finished measurement is truly 32" x 74" and you want the simplest ordering flow. Move to custom quarter-inch sizing when the measured opening, slab replacement, or frame condition is off by a small amount but still inside the current builder range of 24" to 36" wide and 60" to 82" tall.
What to confirm before ordering
- final width and height from the opening or replacement unit
- whether the project is interior and should use the matching slab thickness and jamb range
- jamb depth, handing, and handle prep before checkout
- whether the job should stay at 32" x 74" or move to a quarter-inch custom size
Related resources
- How to measure your door opening
- Ordering odd-size prehung doors
- Standard size vs. custom quarter-inch doors
- Prehung vs. slab doors
Nearby interior size pages
Specifications
Ordering notes
- Choose a standard display size or move to quarter-inch custom measurements.
- Every order is configured as a prehung unit with the frame included.
- Use the notes field for unusual jamb conditions, opening issues, or questions for support.
- Review the live summary before adding the configured door to cart.